HPE ProLiant DL580 Generation9
Overview
HPE ProLiant DL580 Generation9 (Gen9)
The HPE ProLiant DL580 Gen9 Server is the Hewlett Packard Enterprise four socket (4S) enterprise standard x86 server offering commanding performance, rock-solid reliability and availability, and compelling consolidation and virtualization efficiencies.
Supporting Intel® Xeon® E7-4800/8800 v4/v3 processors, the HPE DL580 Gen9 offers enhanced processor performance, up to 6 TBs of memory, greater IO bandwidth (9 PCIe Gen3.0 slots), and 12 Gb/s of SAS speeds. HPE ProLiant DL580 Gen9 has security and data protection features for systemm resiliency that your business can depend on. All, making it ideal for mission-critical enterprise, business intelligence, and database applications.
Whether needed for highly virtualized or cloud based deployments, with intelligence and simplicity of automated management with HPE OneView and HPE iLO 4 your business can achieve agile andd lower cost infrastructure management.
Front View
1.
CPU Memory Drawer Handle
2.
Quick removal access panel
3.
Drive bays 6-10
4.
Systems Insight Display
NOTE: Drives installed in these bays require the optional SAS backplane and cables.
NOTE: Optional NVMe drives are only supported in Drive bays 6-10.
6.
Power On/Standby button and system power LED button
8.
UID button
10.
Drive bays 1-5
5.
Health Status LED
12.
Video connector
7.
NIC status LED
9.
Fans 1-4
11.
Discovery services connectors
13.
USB connectors (2)
Rear View
1.
Serial connector
2.
Video connector
3.
Power Supplies 1-4
4.
PCI expansion slots 1-9
5.
Dedicated iLO connector
6.
FlexibleLOM ports 1-4
7.
USB connectors (4)
NOTE: Port configuration is dependent on the installed FlexibleLOM and may differ from what is shown in the illustration.
Internal View
1.
CPU Memory Drawer
2.
Memory Cartridges 1-8
3.
Processors 1-4
4.
FBWC capacitor slots 1-4
5.
I/O Card Auxiliary Power Connectors
6.
Power Supplies
7.
PCI expansion slots 1-9
8.
FlexibleLOM connector
9.
SPI board (houses iLO chip, FBWC, microSD slot, 2x USB slots, TPM, top SAS backplane connector)
10.
MicroSD Slot
What's New
New Fiber Channel HBA’s up to 32GB
HPE NVIDIA Quadro M6000 24GB GPU
HPE NVIDIA Tesla M60 RAF Dual GPU Module
HPE Dual 8GB microSD USB Kit for redundancy in boot environments
New 100Gb Omnipath networking card
Standard Features
NOTE: For more information regarding Intel Xeon processors, please see the following http://www.intel.com/xeon.
Processor
One or more of the following depending on model
Model
CPU frequency
Cores
L3 Cache
Power
QPI
DDR4 Hz
3.2GHz
4
45MB
140W
9.6GT/s
1866
2.8GHz
10
45MB
165W
9.6GT/s
1866
2.5GHz
18
45MB
165W
9.6GT/s
1866
2.3GHz
18
45MB
150W
9.6GT/s
1866
2.0GHz
18
45MB
115W
9.6GT/s
1866
2.1GHz
18
45MB
140W
9.6GT/s
1866
2.5GHz
16
45MB
165W
9.6GT/s
1866
E7-8860v3
2.2GHz
16
40MB
140W
9.6GT/s
1866
E7-4850v3
2.2GHz
14
35MB
115W
8.0GT/s
1866
E7-4830v3
2.1GHz
12
30MB
115W
8.0GT/s
1866
E7-4820v3
1.9GHz
10
25MB
115W
6.4GT/s
1866
E7-4809v3
2.0GHz
8
20MB
115W
6.4GT/s
1866
E7-8893v4
3.2GHz
4
60MB
140W
9.6GT/s
1866
E7-8891v4
2.8GHz
10
60MB
165W
9.6GT/s
1866
E7-8890v4
2.2GHz
24
60MB
165W
9.6GT/s
1866
E7-8880v4
2.2GHz
22
55MB
150W
9.6GT/s
1866
E7-8870v4
2.1GHz
20
50MB
140W
9.6GT/s
1866
E7-8867v4
2.4GHz
18
45MB
165W
9.6GT/s
1866
E7-8860v4
2.2GHz
18
45MB
140W
9.6GT/s
1866
E7-4850v4
2.1GHz
16
40MB
115W
8.0GT/s
1866
E7-4830v4
2.0GHz
14
35MB
115W
8.0GT/s
1866
E7-4820v4
2.0GHz
10
25MB
115W
6.4GT/s
1866
E7-4809v4
2.1GHz
8
20MB
115W
6.4GT/s
1866
Chipset
Intel® C602J Chipset
Intel® Xeon® E7-4800/8800v3 Processor Family
Intel® Xeon® E7-4800/8800v4 Processor Family
NOTE: For more information regarding Intel® chipsets, please see the following URL: http://www.intel.com/products/server/chipsets/
On System Management Chipset
HPE iLO (Firmware HPE iLO4 2.0) 4GB NAND
NOTE: Read and learn more in the iLO QuickSpecs.
Memory
One of the following depending on model
Type:
HPE SmartMemory
DDR4 Registered (RDIMM) and Quad Rank Load Reduced (LRDIMM)
DIMM Slots Available
96
Maximum Capacity
6TB
(96 x 64GB)
NOTE: Hewlett Packard Enterprise memory from previous generation servers are not qualified or warranted with this HPE ProLiant Server. HPE SmartMemory is required to realize the memory performance improvements and enhanced functionality listed in this document for Gen9. For additional information, please see the HPE SmartMemory QuickSpecs.
NOTE: LRDIMM and RDIMM are distinct memory technologies and cannot be mixed within a server.
NOTE: Depending on the memory configuration and processor model, the memory speed may run at 1866MHz, 1600MHz, or 1333MHz. Please see Memory Population Table below or the Online Memory Configuration Tool at: HPE Server Memory Configurator.
Network Controller
FlexibleLOM
HPE ProLiant Gen9 servers offer a new flexible network technology - FlexibleLOMs, which offers customers a choice of 1Gb, 10Gb, or 10Gb base-T Ethernet or converged networking in their embedded adapter:
HPE Ethernet 1Gb 4-port 331FLR FIO Adapter
HPE Ethernet 1Gb 4-port 366FLR FIO Adapter
HPE FlexFabric 10Gb 2-port 533FLR-T FIO Adapter
HPE FlexFabric 10Gb 2-port 534FLR-SFP+ FIO Adapter
HPE Ethernet 10Gb 2-port 546FLR-SFP+ FIO Adapter
HPE FlexFabric 10Gb 2-port 556FLR-SFP+FIO Adapter
HPE FlexFabric 10Gb 2-port 556FLR-T FIO Adapter
HPE Ethernet 10Gb 2-port 560FLR-SFP+ FIO Adapter
HPE Ethernet 10Gb 2-port 561FLR-T FIO Adapter
HPE Ethernet 10Gb 2-port 562FLR-SFP+FIO Adapter
NOTE: For additional details see the Networking Section of this document.
NOTE: Wake-on-LAN feature is not supported on the DL580 Gen9 with FlexibleLOMs.
Expansion Slots
Primary Riser
(Standard)
Expansion Slots #
Technology
Bus
Width
Connector Width
Bus
Number
Form Factor
Notes
1
PCIe 3.0
x16
x16
C0/03/0
Full length/full height
Proc 4
2
PCIe 3.0
x16
x16
C0/02/0
Full length/full height
Proc 4
3
PCIe 3.0
x16
x16
80/03/0
Full length/full height
Proc 3
4
PCIe 3.0
x8
x16
80/02/0
Full length/full height
Proc 3
5
PCIe 3.0
x8
x16
80/02/1
Full length/full height
Proc 3
6
PCIe 3.0
x16
x16
40/03/0
Full length/full height
Proc 2
7
PCIe 3.0
x8
x16
40/02/0
Full length/full height
Proc 2
8
PCIe 3.0
x8
x16
40/02/1
Full length/full height
Proc 2
9
PCIe 3.0
x16
x16
00/03/0
Full length/full height
Proc 1
NOTE: PCIe slot availability is dependent on the number of processors installed.
NOTE: Inserting cards with PCI bridges may alter the actual bus assignment number.
NOTE: Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest Device ID by bus (starting with the lowest bus).
Slot 2 PCIe Riser
(Optional 3-slot)
719073-B21
Expansion Slots #
Technology
Bus
Width
Connector Width
Bus
Number
Form Factor
Notes
4
PCIe 3.0
X16
X16
16
Full-height, full-length slot
Proc 2
5
PCIe 3.0
X16
X16
20
Full-height, full-length slot
Proc 2
6
PCIe 3.0
X8
X8
23
Full-height, half-length slot
Proc 2
NOTE: Bus Width Indicates the number of physical electrical lanes running to the connector.
NOTE: When populating the second optional riser slot, the second processor must be installed.
NOTE: All slots support PCIe cards to 150W or more depending on card but an additional Power Cord Option is required (PN 669777-B21). See Option Section below for offering.
NOTE: Double wide PCIe cards are only supported in risers with the Processors leveraging the High Performance Heatsink. For Processors requiring double wide GPU support please order the GPU enablement kit (719082-B21).
NOTE: Up to 9 slots supported; all full-length/full-height. Standard: 4 PCI-E 3.0 x8, 5 PCI-E 3.0 x16.
Internal Storage Devices
One of the following depending on model
Hard Disk Drive Backplane
Internal SAS lower and upper backplanes support up to ten SFF hard disk drives or solid state drives or Express Bays (NVMe drives)
NOTE: For Factory Integrated models, five (5) lower drive bays ship standard and five (5) upper drive bays can be ordered separately with a drive backplane kits. For Pre-configured models, please refer to the pre-configured models section below.
Diskette Drive
None
Optional Optical Drive
External
Hard Drives
None ship standard
Maximum Internal Storage
CAPACITY
CONFIGURATION
Hot Plug SFF SAS
20TB
10 x 2.0TB
Hot Plug SFF SAS SSD
38.4TB
10 x 3.84TB
Hot Plug SFF SATA SSD
38.4TB
10 x 3.84TB
Hot Plug SFF NVMe PCIe SSD
8TB
5 x 1.6TB
NOTE: Optional support for 5 NVMe SSDs or 5 SFF drives are also available.
Power Supply
One of the following depending on model
HPE 1500W Common Slot Platinum Plus Hot Plug Power Supply
HPE 1500W Common Slot 48VDC Hot Plug Power Supply
NOTE: 1500W power supply supports high line voltage only.
HPE 1200W Common Slot Platinum Plus Hot Plug Power Supply
NOTE: A minimum of two (2) power supplies are required. Four (4) 1500W power supplies offers N+N redundancy for highly loaded configurations.
Prior to making a power supply selection it is highly recommended that the HPE Power Advisor is run to determine the right size power supply for your server configuration. The HPE Power Advisor is located at: http://www.hp.com/go/hppoweradvisor.
The Hewlett Packard Enterprise Common Slot (CS) power supplies allow for commonality of power supplies across a wide range of ProLiant and Integrity servers, as well as HPE Storage solutions, and are designed to provide the highest power supply efficiency without degrading system performance. Hewlett Packard Enterprise CS power supplies are tested by the Electric Power Research Institute (EPRI) and certified through the ECOS 80 Plus power supply program. HPE CS power supply options provide efficiency ratings of up to 94% (80 Plus Platinum) and are available. All Hewlett Packard Enterprise Common Slot power sources are UL, CE Mark Compliant, hot-plug and support redundant configurations.
HPE CS Platinum Plus power supplies are required when enabling HPE's Intelligent Power Discovery (IPD) solution. IPD is the first technology to create an automated, energy-aware network between IT systems and facilities. This allows your company to reclaim millions of dollars in wasted power capacity and downtime costs across data centers. For more information on the Hewlett Packard Enterprise IPD solution, go to HPE Intelligent Power Distribution Units.
NOTE: Mixing of power supplies in the same server is not supported. All power supplies must be of the same output and efficiency rating. If non-matched power supplies are inserted you will get errors and operation will fail.
Required Cabling
Server Power Cords
Server ships with high-voltage server to PDU power cord.
NOTE: If customers require a local power cord, they can check the power cord matrix for the appropriate county specific SKU. Please see the following power cord matrix for details: http://www.hp.com/go/powercordmatrix.
System Fans
One of the following depending on model
Non-redundant
Redundant
4 Hot Plug Fans (eight rotors with N+1 redundancy)
Interfaces
Serial
1 back
Video
1 front; 1 back
FlexibleLOM Network Ports
Selection of FlexibleLOM options
iLO 4 Remote Management
1 x 1Gbe dedicated
Micro SD Slot
1 internal
NOTE: Dual microSD USB option kit also available (741279-B21).
USB 2.0 Ports
8 total: 2 front; 4 back; 2 internal
Operating Systems and Virtualization Software Support for ProLiant Servers
Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
VMware
CentOS
Oracle Linux
NOTE: For more information on Hewlett Packard Enterprise Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server, please visit our Support Matrix at: http://www.hp.com/go/ossupport and our driver download page http://h20565.www2.hpe.com/hpsc/swd/public/readIndex?sp4ts.oid=8090151.
Upgradeability
Upgradeable to 4 processors
Up to 96 DDR4 DIMM slots
9 PCIe Gen3 expansion slots
NOTE: PCIe slot availability is dependent on the number of processors installed. Please refer to the "Expansion Slots" section for more details.
10 SFF internal HDD/SSD SAS drive bays or 5 SFF Internal Express Bays + 5 SFF Internal HDD/SSD drive bays
NOTE: Five drive bays come standard. An optional five SAS drive or five Express backplane kit with five drive bays can be ordered for ten drives.
5 NVMe SSD drive bays
4 redundant hot-plug power supplies
Industry Standard Compliance
ACPI 2.0. Compliant
PCIe 2.0 Compliant
PXE Support
WOL Support
NOTE: Not supported with FlexLOMs on DL580 Gen9.
Physical Address Extension (PAE) Support
Microsoft® Logo certifications
USB 2.0 Support
ASHRAE A3/A4
NOTE: For additional technical thermal details regarding ambient temperatures, humidity and features support please visit: http://www.hp.com/servers/ASHRAE.
Graphics
Integrated Matrox G200 video standard
16 MB Flash
256 MB DDR 3 with ECC (112 MB after ECC and video)
HPE iLO 4 On System Management Memory
16 MB Flash
256 MB DDR 3 with ECC (112 MB after ECC and video)
HPE Server UEFI/Legacy ROM
Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability and more secured configuration than the legacy ROM while interacting with your server at boot time. HPE ProLiant Gen9 platform defaults to UEFI and can be factory or field configured for Legacy BIOS Boot Mode.
NOTE: The UEFI System Utilities function is analogous to the HPE ROM-Based Setup Utility (RBSU) of legacy BIOS. For more information, please visit http://www.hpe.com/servers/uefi.
UEFI enables numerous new capabilities specific to HPE ProLiant servers such as:
Secure Boot
Operating system specific functionality
Support for > 2.2 TB (using GPT) boot drives
USB 3.0 Stack
Embedded UEFI Shell
Mass Configuration Deployment Tool using RESTful API for iLO 4
PXE boot support for IPv6 networks
Boot support for option cards that only support a UEFI option ROM
Network Stack configurations
NOTE: For UEFI Boot Mode, boot environment and OS image installations should be configured properly to support UEFI.
NOTE: UEFI FIO Setting (758959-B22) can be selected to configure the system in Legacy mode in the factory for your HPE ProLiant Gen9 Server.
Form Factor
4U rack
Embedded Management
HPE Integrated Lights-Out
(HPE iLO)
Monitor your servers for ongoing management, service alerting, reporting and remote management with HPE iLO. Learn more at http://www.hpe.com/info/ilo.
UEFI
Configure and boot your servers securely with industry standard Unified Extensible Firmware Interface (UEFI). Learn more at http://www.hpe.com/servers/uefi.
RESTful API
RESTful API for iLO 4 is Redfish 1.0 conformance for simplified server management such as configuration and maintenance tasks based on modern industry standards. Learn more at http://www.hpe.com/info/restfulapi.
Intelligent Provisioning
Hassle free server and OS provisioning for 1 or few servers with Intelligent Provisioning. Learn more at http://www.hpe.com/servers/intelligentprovisioning.
Embedded Remote Support
The Hewlett Packard Enterprise embedded remote support, when used with Insight Online direct connect or HPE Insight Remote Support, allows HPE ProLiant servers to transmit hardware events directly to Hewlett Packard Enterprise or a Hewlett Packard Enterprise Authorized Partner for automated phone home support. Learn more at http://www.hpe.com/info/insightonline/explore.
Server utilities
Smart Update
Optimize firmware and driver updates with Smart Update solutions including Smart Update Manager (SUM) and Service Pack for ProLiant (SPP). Learn more at http://www.hpe.com/servers/smartupdatemanager.
HPE Systems Insight Manager (HPE SIM)
HPE SIM allows you to monitor the health of your HPE ProLiant Servers and HPE Integrity Servers, and also provides you with basic support for non-HPE servers.
HPE SIM also integrates with Smart Update Manager to provide quick and seamless firmware updates. Learn more at http://www.hpe.com/servers/hpsim.
Scripting Tool Kit and Windows PowerShell
Provision 1 to many servers using your own scripts to discover and deploy them with Scripting Tool Kit (STK) for Windows and Linux or Scripting Tools for Windows PowerShell. Learn more at http://www.hpe.com/servers/proliant/stk or http://www.hpe.com/servers/powershell.
RESTful Interface Tool
RESTful Interface tool is a scripting tool to provision using RESTful API for iLO 4 to discover and deploy servers at scale. Learn more at http://www.hpe.com/info/resttool.
HPE iLO Mobile Application
Enables the ability to access, deploy, and manage your server anytime from anywhere from select smartphones and mobile devices. For additional information please visit: http://www.hpe.com/info/ilo/mobileapp.
HPE Insight Online
HPE Insight Online, available at no additional cost as part of your Hewlett Packard Enterprise warranty or contractual support agreement with Hewlett Packard Enterprise, is a personalized dashboard for simplified tracking of IT operations and support information from anywhere, anytime. Learn more at http://www.hpe.com/info/insightonline/explore.
Security
Power-on password
Keyboard password
External USB port enable/disable
Network Server Mode
Serial interface control
Administrator's password
Trusted Platform Module (TPM)
TPM 2.0
NOTE: HPE Trusted Platform Module 2.0 Option (745823-B21) works with Gen9 servers with UEFI Mode not Legacy Mode. It is not compatible with HP ProLiant Gen8 servers or earlier generation variants. HPE Gen9 servers purchased earlier may need the latest firmware update to be compatible with the TPM 2.0 Option. The earlier HPE Trusted Platform Module Option (488069-B21) is the TPM 1.2 version, which is also available however TPM 2.0 has newer technology standards incorporated. The TPM 1.2 compatible server platforms include Gen8 and Gen9 servers. HPE server systems can have a TPM module (of any type) installed only once. It cannot be replaced with any other TPM module.
Intel® Secure Key
HPE Secure Encryption (Smart Array Controller)
HPE Advanced Data Guard (Smart Array Controller)
Warranty
This product is covered by a global limited warranty and supported by HPE Services and a worldwide network of HPE Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HPE Care Pack services or customized service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
NOTE: Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support with next business day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have HPE replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html.
Optional Features
Embedded Management
iLO Advanced
HPE iLO Advanced licenses offer smart remote functionality without compromise, for all HPE ProLiant servers. The license includes the full integrated remote console, virtual keyboard, video, and mouse (KVM), multi-user collaboration, console record and replay, and GUI-based and scripted virtual media and virtual folders. You can also activate the enhanced security and power management functionality. Learn more about HPE iLO Advanced at http://www.hpe.com/servers/iloadvanced.
Server Management
HPE Insight Control
HPE Insight Control, lets you deploy, migrate, monitor, remote control, and optimize your IT infrastructure through a single, simple management console. For more information, see http://www.hpe.com/info/insightcontrol.
HPE Insight Cluster Management Utility (CMU)
HPE Insight Cluster Management Utility is a HyperScale management framework that includes software for the centralized provisioning, management and monitoring of nodes and infrastructure. Learn more at http://www.hpe.com/info/cmu.
Rack and Power Infrastructure
HPE Rack and Power Infrastructure products and services create highly efficient and intelligent solutions for existing or new IT data centers. HPE Rack and Power infrastructure solutions - rack infrastructure, power protection and management, performance optimized data centers (PODs) - are the foundation you are looking for to help secure your long-term IT success. These products are designed to help you react to changes in the industry. They deliver efficient, easy-to-use capabilities to manage, monitor, deploy and provision infrastructure from entry to enterprise. As an industry leader, Hewlett Packard Enterprise is uniquely positioned to address the key concerns of power, cooling, cable management and system access.
Learn more at HPE Rack and Power Infrastructure.
High Performance Clusters
HPE Cluster Platforms
HPE Cluster Platforms are specifically engineered, factory-integrated large-scale ProLiant clusters optimized for High Performance Computing, with a choice of servers, networks and software. Operating system options include specially priced offerings for Red Hat Enterprise Linux and SUSE Linux Enterprise Server, as well as Microsoft Windows HPEC Server. A Cluster Platform Configurator simplifies ordering. http://www.hp.com/go/clusters.
HPE HPEC Interconnects
High Performance Computing (HPC) interconnect technologies are available for this server as part of the HPE Cluster Platform portfolio. These high-speed InfiniBand and Gigabit interconnects are fully supported by Hewlett Packard Enterprise when integrated within a Hewlett Packard Enterprise cluster. Flexible, validated solutions can be defined with the help of configuration tools. http://www.hp.com/techservers/clusters/ucp/index.html.
HPE Insight Cluster Management Utility
HPE Insight Cluster Management Utility (CMU) is a Hewlett Packard licensed and supported suite of tools that are used for lifecycle management of hyperscale clusters of Linux ProLiant systems. CMU includes software for the centralized provisioning, management and monitoring of nodes. CMU makes the administration of clusters user friendly, efficient, and effective. http://www.hp.com/go/cmu.
HPC Interconnects
NOTE: High Performance Computing (HPC) interconnect technologies are available for this server under the HPE Cluster Platform product portfolio. These high-speed interconnects are fully supported by Hewlett Packard Enterprise when they are part of these configure to order clusters. Solutions can be defined with a lot of flexibility with the help of configuration tools. Please visit the following URL to configure HPEC Clusters with InfiniBand Interconnects: http://www.hp.com/techservers/clusters/ucp/index.html.
Storage Software
Whether you need to solve a specific data protection, archiving, or storage command and control challenge, or deliver on strategic consolidation, compliance, or continuity initiatives, look no further than Hewlett Packard Enterprise storage software. Our storage software helps you reduce costs, simplify storage infrastructure, protect vital assets and respond faster to business opportunities.
Storage software that gets the job done:
Data Protection and Recovery Software
Whether you're a large enterprise or a smaller business, Hewlett Packard Enterprise data protection and recovery software will cost-effectively protect you against disaster and ensure business continuity.
Data Archive and Migration Software
Hewlett Packard Enterprise storage software enables you to comply with data retention and retrieval requirements, improve application performance, and reduce costs by efficiently migrating infrequently accessed or less valuable data to lower cost storage.
Storage Resource Management Software (SRM)
Hewlett Packard Enterprise storage resource management software reduces operational costs and provides the command and control foundation you need to efficiently manage and visualize your physical and virtual environments.
Data Replication Software
Hewlett Packard Enterprise offers array-based and host-based replication software for use in disaster recovery, testing, application development and reporting.
Storage Device Management Software
Maximize your investment in Hewlett Packard Enterprise storage and networking with software that enables hardware-specific configuration, performance tuning and connectivity management.
HPE StoreVirtual VSA
With HPE StoreVirtual VSA you can use the power of virtualization to create a virtual array within your host server. Manage it as a single pool of shared storage capacity, and scale it to match your evolving needs. HPE ProLiant Gen9 servers include a 3-year limited license for HPE StoreVirtual VSA software with 1TB of capacity at no extra cost. Simply select to install HPE StoreVirtual VSA software during server setup within Intelligent Provisioning. More information, instructional videos, and free console management software are available at http://www.hp.com/go/vsa1TB.
NOTE: For more information about Storage Software including QuickSpecs, please see: http://www.hp.com/go/storage/software.
Solutions
Factory Express Portfolio for Servers and Storage
HPE Factory Express offers configuration, customization, integration and deployment services for Hewlett Packard Enterprise servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging, and custom packaging. Hewlett Packard Enterprise products supported through Factory Express include a wide array of servers and storage: HPE Integrity, HPE ProLiant, HPE ProLiant Server Blades, HPE BladeSystem, HPE 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP,, rackable tape libraries and configurable network switches.
For more information on Factory Express services for your specific server model please contact your sales representative or go to: http://www.hp.com/go/factory-express.
One Config Simple (SCE)
SCE is a guided self-service tool to help sales and non-technical people provide customers with initial configurations in 3 to 5 minutes. You may then send the configuration on for configuration help, or use in your existing ordering processes. If you require "custom" rack configuration or configuration for products not available in SCE, please contact Hewlett Packard Enterprise Customer Business Center or an Authorized Partner for assistance. https://h22174.www2.hp.com/SimplifiedConfig/Index.
- ۹۵/۱۲/۲۰